Cyzag
Estimate leak

Features

What is in the box.

27 features your engineers configure themselves, behind every solution on this site.

All features at a glance

Build

Your engineers build the screens the plant runs on, without code.

  • New board · AI assistant

    A board for the evaporation shift: steam use, levels and open tasks.

    Which units, and over the last shift or the last 24 hours?

    EV-201 and C-210, last shift.

    Changes made
    • Added four widgets
    • Linked six tags
    • Grouped by unit
    EV-201
    Steam per tonne 2.38
    Level T-201 62%
    C-210
    ΔT trend
    Open tasks 3

    AI app builder

    Describe the board you need and the AI builds it: it asks a few questions, then lays out the widgets, data and groups. Ask for changes in plain words and it shows each one it made.

  • Shift board · Day shift

    Log entries

    10:39 EV-201 steam per tonne high Deviation
    09:15 P-301 vibration checked, logged Routine

    Tasks

    Weekly 5S, control room Open
    Shift OEE categorisation Open

    Inspection rounds

    Daily walkdown, unit 2 Open
    Manual readings, unit 2 Closed

    Shift sign-off

    Signed in 09:00 · Day shift lead Note: reactor to finish at 15:00

    No-code boards and views

    Boards and custom views built from widgets, by your engineers, and changed the week they need to.

  • Add a widget
    • Trend
    • KPI
    • Gauge
    • Table
    • Form
    • Task list
    • Process diagram
    • Bar chart
    • Logbook
    More than 50 in all

    More than 50 widgets

    Trends, KPIs, gauges, tables, forms, task lists and process diagrams, ready to place on any board.

  • Evaporation · live
    T-201 62% P-301 41 m³/h EV-201 Steam 2.38 t/t +8% normal Steam Product

    Process diagrams

    Live process graphics of your units, with equipment, flows and values from the historian.

  • Form · P-301 weekly inspection
    Fields
    • Number
    • Choice
    • Photo
    • Signature
    • Text
    Coupling guard in place Yes No
    1 photo attached Signed · Shift A · 06:42

    Forms

    Inspections, approvals and permits as forms your engineers build once and reuse across sites.

  • Task template
    Weekly pump check
    1. Vibration reading
    2. Bearing temperature
    3. Guard and coupling
    Every MondayRotating shiftEvaporation pumps
    Generated
    Mon 13 Jul P-301 Shift A
    Mon 13 Jul P-302 Shift A
    Mon 20 Jul P-301 Shift B
    Mon 20 Jul P-302 Shift B

    Task templates

    Routines and checks defined once, then scheduled by shift, site or asset.

  • Calculations
    Steam per tonne 3 sites
    EV-201.steam ÷ EV-201.product
    5.47 t/h÷2.30 t/h= 2.38 t/t
    +8% normal Normal 2.20 t/t
    0.41 t/h extra steam × €50/t ≈ €21/h
    • Yield 96.1 %
    • Energy per tonne 1.84 MWh/t
    • OEE 78 %

    Calculation library

    Your own formulas, from yield to energy per tonne, run on live data and reused across sites.

All features ↑

Analyse

From a number on a board to the reason behind it.

  • Analysis · Evaporation · 7 days

    AI summary Since Monday, FIC-220 has started to oscillate and EV-201 steam per tonne is 8% above normal.

    EV-201 steam per tonne
    C-210 temperature gap
    FIC-220 flow
    FIC-220 valve position
    Control-loop check · FIC-220
    Oscillation Yes, about every 4 min
    Saturation No
    Valve or tuning Valve problem more likely

    Analysis workspace

    Trends and analysis on one canvas. Search the history by value and drag charts into a grid. Control-loop checks find oscillation and saturation, and tell a valve problem from a tuning problem. Save the layout as a template for the next unit. With your AI service switched on, an AI summary says what has changed since you last looked.

    Process data analytics →
  • Energy · drill-down · 24 h
    • Total energy 5.32 MWh
    • Line 1 2.22 MWh
    • Line 2 2.24 MWh
    • Distillation column 0.86 MWh
    • Compressor 1 0.29 MWh
    • Compressor 2 · above normal 0.57 MWh

    Parameter drill-down

    From a site total to the line, the column and the compressor behind it, in a few clicks.

  • EV-201 · what feeds it
    LIKELY CAUSE Clean: 4 → 6 weeks Tube fouling Feed rate less likely Steam pressure less likely EV-201 steam per tonne +8% normal
    Strong contribution Weak contribution

    Cause-and-effect flow

    Every flag shows the plant around it: what feeds the equipment and what it feeds, with the most likely cause highlighted and each link shaded by how much it contributed.

  • Batch R1-1912 against the best 20
    Best 20 This batch Downtime
    • Downtime · feed pump · Step 3 28 min
    • Downtime · waiting for lab · Step 3 14 min

    Batch and loss analysis

    Batches compared step by step, with downtime and losses overlaid on the process trend.

All features ↑

AI

AI that drafts and gathers. People decide, and every figure comes from the engine.

  • Ask the plant

    Which equipment is costing us most this week?

    EV-201. Steam per tonne is 8% above normal, about €21 an hour 1. It started after the cleaning interval moved from four to six weeks 2; the root-cause analysis confirms it 3.

    1. Flag EV-201, week 28
    2. Logbook, 14 March: cleaning interval changed
    3. Root-cause analysis, EV-201

    AI chat

    Questions in plain language, answered from your own records, with every source cited.

  • Root-cause analysis · EV-201
    1. ✓ Flag raised Engine
    2. ✓ Evidence gathered AI step AI
    3. ✓ Cause confirmed: five whys Process engineer Sign-off
    4. 4 Approve action: four-week clean Area manager · waiting for approval Sign-off
    5. 5 Result verified Engine, after one cycle

    AI workflows

    Workflow steps where AI gathers the evidence or drafts the summary or action, then hands it to a person to approve.

  • Agent · Evidence gatherer

    Role Gathers the evidence behind a flag and drafts a summary for the engineer.

    Tools · read-only Read historian trendsRead the logbook and roundsRead work ordersSearch past root-cause analyses
    Cannot Write a setpointClose a taskApprove an action

    Agents

    A role plus the read-only tools it may use. Agents gather evidence and draft work; none can change anything in the plant.

    How the agents work →
  • AI handover briefing · Night shift
    Critical · read first

    EV-201 steam use 8% above normal; action approved, not yet done.

    Top priorities
    1. Confirm the EV-201 clean is booked for Thursday.
    2. Check P-301 alignment after the coupling work.
    Outstanding work 3 open tasks · 1 round due 06:00
    Watch-outs FIC-220 oscillating since 06:10; the valve is the likely source.
    Drafted from 14 log entries, 6 tasks and 2 rounds

    AI handover briefing

    The incoming shift's priorities, open work and watch-outs, drafted from what the outgoing crew recorded.

All features ↑

Run

The work itself: tasks, workflows and the people doing them.

  • Tasks · Evaporation
    To do 2
    Check P-301 alignment after coupling work JM Due 14 Jul
    Check TT-212 calibration on C-210 AK Due 17 Jul
    In progress 1
    From a flag Return EV-201 clean to four weeks MK Due 13 Jul
    Done 2
    Confirm cause, EV-201 MK Done
    Morning round, unit 2 SD Done

    Task management

    Routine, non-routine and improvement actions in one list, with owners, due dates and a view of who is overloaded.

  • Permit to work · P-301
    3 of 6 approved
    1. ✓ Request raised Operator
    2. ✓ Isolations confirmed Shift lead
    3. ✓ Gas test passed HSE
    4. 4 Area approval Area manager · waiting
    5. 5 Work complete Maintenance
    6. 6 Handed back Operator

    Workflows

    Work that takes several steps, with an approval at each one and live progress for everyone.

  • Scheduled jobs
    • Historian sync Every 5 minutes 2 min ago
    • Daily cost report, emailed Daily · 06:00 Today 06:00
    • Weekly pump check tasks Mondays · 05:00 Mon 6 Jul
    • Monthly OEE report 1st of the month · 07:00 1 Jul

    Scheduled jobs

    Reports, data syncs and routine tasks that run on time, without anyone having to remember them.

  • Notifications
    • Flag raised: EV-201 steam per tonne To Process engineer · Desk
    • Task due Thursday: realign P-301 To Maintenance · Phone
    • Round out of spec: safety checklist To Shift lead · Tablet
    • Approval waiting: four-week clean To Area manager · Phone

    Notifications

    Alerts and tasks that reach the right person, on a desk, a tablet or a phone.

  • 09:38
    Operator rounds
    Shift A · Operator round Submitted Done 06:40
    Shift A · Safety checklist Submitted Done 07:05 ▲ 1 out of spec
    Shift B · Operator round Assigned Due today

    Mobile and offline

    Cyzag Field for rounds, tasks and forms, offline on certified handhelds; Cyzag Mobile for the whole platform.

All features ↑

Govern

Who can see and change what, and a record of everything they did.

  • Access · North plant › Evaporation
    OperatorProcess engineerArea manager
    View boards ✓ ✓ ✓
    Log entries ✓ ✓ ✓
    Edit boards – ✓ ✓
    Approve actions – – ✓

    Role-based access

    What each person can see and change follows their role, site and unit.

  • Audit trail · EV-201 deviation
    1. Action approved: four-week clean 10 Jul 13:49·Area manager
    2. Cause confirmed; task assigned 10 Jul 12:32·Process engineer
    3. Status: New → Under review 9 Jul 16:07·Process engineer
    4. Flag raised: EV-201 steam per tonne 9 Jul 14:30·Engine

    Audit trail

    Every entry and every change time-stamped and attributed, ready for an investigation or an audit.

  • Electronic sign-off
    Record
    Action: return EV-201 clean to four weeks
    Signed by
    Area manager
    Meaning
    Approved
    Time
    10 Jul 2026 · 13:49
    Signed electronically Kept with the record and its audit trail

    Electronic sign-off

    Approvals and confirmations signed electronically, with full traceability.

All features ↑

Connect

Read-only, and never a write to your control system. Your historian stays, SAP stays.

  • Connections · historian
    AVEVA PI Your historian, unchanged
    Read-only
    Cyzag 1,240 tags · 2 s ago
    Also connects to
    • GE Proficy Historian
    • Aspen IP.21
    • Canary
    • TimescaleDB
    • InfluxDB

    Historians

    AVEVA PI, GE Proficy Historian, Aspen IP.21, Canary, TimescaleDB and InfluxDB.

    What it connects to →
  • Connections · systems
    • SAP → Tasks Work orders
    • AVEVA MES → Batch analysis Batches
    • SQL Server → Forms and quality Lab results
    • Azure → Analysis Plant data

    MES, ERP and data platforms

    AVEVA MES, Proficy Plant Applications, aspenONE, SAP, Microsoft SQL Server and Azure.

    What it connects to →
  • REST API
    GET /flags?area=evaporation 
    {
  "tag": "EV-201",
  "issue": "Steam per tonne 8% above normal",
  "status": "Action approved",
  "eurPerHour": 21
}
    • Power BI
    • Power Apps
    • Your own tools

    REST API

    For anything else your plant runs, and for Power BI and Power Apps.

All features ↑

Start here

See it built on your own plant.

Start with a working session: your engineers and ours, on your plant's own problems.

Book a working session → Explore the pilot